Pairing a new remote to TetraSki

If a remote needs to be replaced, the new remote must be paired to your TetraSki. Follow these instructions to perform the remote pairing.

Materials Needed:

1x - New Remote

  1. Note the HW# of your TetraSki. This number is displayed on the splash screen when the ski is powered on, and should be TSXXX, with the XXX being the number.

  2. Power on your new remote. Simultaneously press-and-hold the power and trigger buttons for five seconds, until you hear a double chime. The remote is now in pairing mode.

  3. Quickly press the power button the number of times matching your HW#. For example, if your ski is TS005, rapidly press the power button five times.

  4. The LED should light up yellow as the remote is programming itself, then green upon success. The remote will chime twice to confirm.

  5. At this point, your new remote should be paired with your ski. Test for successful pairing by moving the joystick or changing modes.

MaintenanceWhitney ChildersRemote, Pairing